Welcome to our website Antique Jewellery. You will discover here the honest product assessment you have been looking for about Frog Pin. Also please show your appreciation above by clicking one of the social media buttons for this website.

Frog Pin

Club Penguin Frog Pin Cheat

Magnetic Levitation

Lift

Magnetic materials and systems are able to attract or press each other apart or together with a force dependent on the magnetic field and the area of the magnets, and a magnetic pressure can then be defined.

The magnetic pressure of a magnetic field can be calculated by:

where Pmag is the force per unit area in N/m2, B is the magnetic field in Teslas, and 0 = 4107 NA2 is the permeability of the vacuum.

Stability

Static stability means that any small displacement away from a stable equilibrium causes a net force to push it back to the equilibrium point.

Earnshaw's theorem proved conclusively that it is not possible to levitate stably using only static, macroscopic, paramagnetic fields. The forces acting on any paramagnetic object in any combination of gravitational, electrostatic, and magnetostatic fields will make the object's position unstable along at least one axis, and can be unstable along all axes. However, several possibilities exist to make levitation viable, for example, the use of electronic stabilization or diamagnetic materials; it can be shown that diamagnetic materials are stable along at least one axis, and can be stable along all axes.

Dynamic stability occurs when the levitation system is able to damp out any vibration-like motion that may occur.

Stability methods

For successful levitation and control of all 6 axes (3 spatial and 3 rotational) a combination of permanent magnets and electromagnets or diamagnets or superconductors as well as attractive and repulsive fields can be used. From Earnshaw's theorem at least one stable axis must be present for the system to levitate successfully, but the other axes can be stabilised using ferromagnetism.

The primary ones used in maglev trains are servo-stabilized electromagnetic suspension (EMS), electrodynamic suspension (EDS), and (in the future) Inductrack.

Mechanical constraint (Pseudo-levitation)

With a small amount of mechanical constraint for stability, pseudo-levitation is relatively straightforwardly achieved.

If two magnets are mechanically constrained along a single vertical axis, for example, and arranged to repel each other strongly, this will act to levitate one of the magnets above the other.

Another geometry is where the magnets are attracted, but constrained from touching by a tensile member, such as a string or cable.

Another example is the Zippe-type centrifuge where a cylinder is suspended under an attractive magnet, and stabilized by a needle bearing from below.

Direct diamagnetic levitation

A live frog levitates inside a 32 mm diameter vertical bore of a Bitter solenoid in a magnetic field of about 16 teslas at the High Field Magnet Laboratory of the Radboud University in Nijmegen the Netherlands. Direct link to video

A substance that is diamagnetic repels a magnetic field. All materials have diamagnetic properties, but the effect is very weak, and is usually overcome by the object's paramagnetic or ferromagnetic properties, which act in the opposite manner. Any material in which the diamagnetic component is strongest will be repelled by a magnet, though this force is not usually very large.

Earnshaw's theorem does not apply to diamagnets. These behave in the opposite manner to normal magnets owing to their relative permeability of r < 1 (i.e. negative magnetic susceptibility).

Diamagnetic levitation can be used to levitate very light pieces of pyrolytic graphite or bismuth above a moderately strong permanent magnet. As water is predominantly diamagnetic, this technique has been used to levitate water droplets and even live animals, such as a grasshopper, frog and a mouse. However, the magnetic fields required for this are very high, typically in the range of 16 teslas, and therefore create significant problems if ferromagnetic materials are nearby.

The minimum criterion for diamagnetic levitation is , where:

is the magnetic susceptibility

is the density of the material

g is the local gravitational acceleration (-9.8 m/s2 on Earth)

0 is the permeability of free space

B is the magnetic field

is the rate of change of the magnetic field along the vertical axis.

Assuming ideal conditions along the z-direction of solenoid magnet:

Water levitates at

Graphite levitates at

See also: Diamagnetic levitation in the Diamagnetism article.

Superconductors

Superconductors may be considered perfect diamagnets (r = 0), as well as the property they have of completely expelling magnetic fields due to the Meissner effect when the superconductivity initially forms. The levitation of the magnet is further stabilized due to flux pinning within the superconductor; this tends to stop the superconductor leaving the magnetic field, even if the levitated system is inverted.

These principles are exploited by EDS (electrodynamic suspension) magnetic levitation trains, superconducting bearings, flywheels, etc.

In trains where the weight of the large electromagnet is a major design issue (a very strong magnetic field is required to levitate a massive train) superconductors are sometimes proposed for use for the electromagnet, since they can produce a stronger magnetic field for the same weight.

Further information: Superdiamagnetism

Diamagnetically-stabilized levitation

A permanent magnet can be stably suspended by various configurations of strong permanent magnets and strong diamagnets. When using superconducting magnets, the levitation of a permanent magnet can even be stabilized by the small diamagnetism of water in human fingers.

Rotational stabilization

Main article: Spin stabilized magnetic levitation

A magnet can be levitated against gravity when gyroscopically stabilized by spinning it in a toroidal field created by a base ring of magnet(s). However, it will only remain stable until the rate of precession slows below a critical threshold the region of stability is quite narrow both spatially and in the required rate of precession. The first discovery of this phenomenon was by Roy Harrigan, a Vermont inventor who patented a levitation device in 1983 based upon it. Several devices using rotational stabilization (such as the popular Levitron toy) have been developed citing this patent. Non-commercial devices have been created for university research laboratories, generally using magnets too powerful for safe public interaction.

Servomechanisms

Main article: Electromagnetic suspension

The attraction from a fixed strength magnet decreases with increased distance, and increases at closer distances. This is termed 'unstable'. For a stable system, the opposite is needed, variations from a stable position should push it back to the target position.

Stable magnetic levitation can be achieved by measuring the position and speed of the object being levitated, and using a feedback loop which continuously adjusts one or more electromagnets to correct the object's motion, thus forming a servomechanism.

Many systems use magnetic attraction pulling upwards against gravity for these kinds of systems as this gives some inherent lateral stability, but some use a combination of magnetic attraction and magnetic repulsion to push upwards.

This is termed ElectroMagnetic Suspension (EMS). For a very simple example, some tabletop levitation demonstrations use this principle, and the object cuts a beam of light to measure the position of the object. The electromagnet is above the object being levitated; the electromagnet is turned off whenever the object gets too close, and turned back on when it falls further away. Such a simple system is not very robust; far more effective control systems exist, but this illustrates the basic idea. A practical demonstration of such system can be seen here. Of course in the real situation the problem becomes much more complex while the requirements of a MAGLEV suspension are difficult to achieve, i.e the electromagnetic suspension has to support very large mass (for axample 1T) within a small air gap (in the region of mm). Also, the EMS system has to accommodate the rail irregularities while follow the track gradients. Nevertheless, all these requirements can be achieved using advance control strategies. A practical demonstration of a 25 kg Electro-magnetic suspension setup is shown here. The Electromagnets are suspending 5mm below the track (rail). The control can be done using classical strategies as shown here or modern control strategies as shown here.

EMS magnetic levitation trains are based on this kind of levitation: The train wraps around the track, and is pulled upwards from below. The servo controls keep it safely at a constant distance from the track.

Induced currents/Eddy currents

This is sometimes called ElectroDynamic Suspension (EDS).

Relative motion between conductors and magnets

If one moves a base made of a very good electrical conductor such as copper, aluminium or silver close to a magnet, an (eddy) current will be induced in the conductor that will oppose the changes in the field and create an opposite field that will repel the magnet (Lenz's law). At a sufficiently high rate of movement, a suspended magnet will levitate on the metal, or vice versa with suspended metal. Litz wire made of wire thinner than the skin depth for the frequencies seen by the metal works much more efficiently than solid conductors.

An especially technologically-interesting case of this comes when one uses a Halbach array instead of a single pole permanent magnet, as this almost doubles the field strength, which in turn almost doubles the strength of the eddy currents. The net effect is to more than triple the lift force. Using two opposed Halbach arrays increases the field even further.

Halbach arrays are also well-suited to magnetic levitation and stabilisation of gyroscopes and electric motor and generator spindles.

Oscillating electromagnetic fields

A conductor can be levitated above an electromagnet (or vice versa) with an alternating current flowing through it. This causes any regular conductor to behave like a diamagnet, due to the eddy currents generated in the conductor. Since the eddy currents create their own fields which oppose the magnetic field, the conductive object is repelled from the electromagnet.

This effect requires non-ferromagnetic but highly conductive materials like aluminium or copper, as the ferromagnetic ones are also strongly attracted to the electromagnet (although at high frequencies the field can still be expelled) and tend to have a higher resistivity giving lower eddy currents. Again, litz wire gives the best results.

The effect can be used for stunts such as levitating a telephone book by concealing an aluminium plate within it.

Strong focusing

Main article: Strong focusing

Earnshaw's theory strictly only applies to static fields. Alternating magnetic fields, even purely alternating attractive fields, can induce stability and confine a trajectory through a magnetic field to give a levitation effect.

This is used in particle accelerators to confine and lift charged particles, and has been proposed for maglev trains also.

Difficulties

Most of the levitation techniques have various complexities.

Many of the active suspension techniques have a fairly narrow region of stability.

Magnetic fields are conservative forces and therefore in principle have no built-in damping. This can permit vibration modes to exist that can cause the item to leave the stable region. Eddy currents can be stabilizing if a suitably shaped conductor is present in the field, and other mechanical or electronic damping techniques have been used in some cases.

The power requirements of electromagnets increase rapidly with load-bearing capacity, which also necessitates relative increases in conductor and cooling equipment mass and volume.

Superconductors require very low temperatures to operate, often helium cooling is employed.

Uses

Maglev

Main article: Maglev (transport)

Maglev, or magnetic levitation, is a system of transportation that suspends, guides and propels vehicles, predominantly trains, using magnetic levitation from a very large number of magnets for lift and propulsion. This method has the potential to be faster, quieter and smoother than wheeled mass transit systems. The technology has the potential to exceed 6,400 km/h (4,000 mi/h) if deployed in an evacuated tunnel. If not deployed in an evacuated tube the power needed for levitation is usually not a particularly large percentage and most of the power needed is used to overcome air drag, as with any other high speed train.

The highest recorded speed of a maglev train is 581 kilometres per hour (361 mph), achieved in Japan in 2003, 6 km/h faster than the conventional TGV speed record. This is slower than many aircraft, since aircraft can fly at far higher altitudes where air drag is lower, thus high speeds are more readily attained.

Magnetic bearings

Magnetic bearings

Flywheels

Centrifuges

See also

Acoustic levitation

Aerodynamic levitation

Electrostatic levitation

Optical levitation

Cyclotrons levitate and circulate charged particles in a magnetic field

Inductrack a particular system based on Halbach arrays and inductive track loops

Launch loop

Levitron

Linear motor

Rapid transits using linear motor propulsion

Magnetic bearing

Nagahori Tsurumi-ryokuchi Line

Zippe-type centrifuge uses magnetic lift and a mechanical needle for stability

References

^ Lecture 19 MIT 8.02 Electricity and Magnetism, Spring 2002

^ Diamagnetically stabilized magnet levitation

^ US4,382,245 (PDF version) (1983-05-03) Roy M. Harrigan, Levitation device. 

^

^ Eddy current magnetic levitation, models and experiments by Marc T. Thompson

^ Levitated Ball-Levitating an 1cm aluminum sphere

^ a b Attractive levitation for high-speed ground transport with largeguideway clearance and alternating-gradient stabilization Hull, J.R. Magnetics, IEEE Transactions on Volume 25, Issue 5, Sep 1989 Page(s):3272 - 3274 Digital Object Identifier 10.1109/20.42275

^ http://www.popsci.com/scitech/article/2004-04/trans-atlantic-maglev

^ "Japan's maglev train sets speed record". CTVglobemedia Publishing Inc.. 2003-12-02. http://www.theglobeandmail.com/servlet/story/RTGAM.20031202.gtmaglevdec2/BNStory/International/. Retrieved 2009-02-16. 

External links

Maglev Trains Audio slideshow from the National High Magnetic Field Laboratory discusses magnetic levitation, the Meissner Effect, magnetic flux trapping and superconductivity

Magnetic Levitation - Science is Fun

Magnetic (superconducting) levitation experiment (YouTube)

Maglev video gallery

How can you magnetically levitate objects?

Levitated aluminum ball (oscillating field)

Instructions to build an optically triggered feedback maglev demonstration

Videos of diamagnetically levitated objects, including frogs and grasshoppers

Larry Spring's Mendocino Brushless Magnetic Levitation Solar Motor

A Classroom Demonstration of Levitation...

25kg MAGLEV suspension setup

25kg MAGLEV suspension control via Classical control strategy

25kg MAGLEV suspension via State feedback control strategy

Frogs levitate in a strong enough magnetic field

Categories: Levitation | Magnetism | Physics
About the Author

I am a professional writer from China Hardware Suppliers, which contains a great deal of information about silver brazing rod , self cleaning strainer, welcome to visit!

If you are looking for a different item here are a list of related products on Antique Jewellery, please check out the following:

• Frog Pin
• Frog Pin