Bakelite Safety

wordpress plugins and themes automotive,business,crime,health,life,politics,science,technology,travel

Thanks for visiting Antique Jewellery. Please remember to bookmark this page Bakelite Safety. If you found what your looking for, then don"t forget to click an appreciation button above for this post.

%%title%%
VINTAGE Type G EVERSHARP SCHICK Navy Blue Bakelite Handle Injector SAFETY RAZOR
$36.00
quality
%%title%%
Vintage Enders Speed Safety Razor with Bakelite handle
$4.99
quality
%%title%%
Injector Single Edge Safety Razor Butterscotch Swirl Bakelite Handle Vintage
$7.20
quality
%%title%%
Vintage GEM Junior Single Edge Safety Razor Black Bakelite Handle PATD 1912
$10.50
quality
%%title%%
Vintage EVERSHARP SCHICK Injector Safety Razor Bakelite Handle w razors
$29.99
quality
%%title%%
Lot of 3 Vintage Flip Top Safety Razors Star Gem Bakelite and Schick Bakelite
$19.50
quality
%%title%%
Gillette 1931 1935 Goodwill Bakelite Presentation DE Safety Razor Gold Tone
$34.99
quality
%%title%%
Vintage Mid Century GEM Safety Razor Silver Tone with white bakelite grip handle
$24.99
quality
%%title%%
Vintage Gillette Safety Razor Bakelite Handle
$9.99
quality
%%title%%
Vintage Schick Injector Safety Razor US Pat no 1806087 Bakelite Handle
$5.99
quality
%%title%%
2 vtg Razor Gold Tone Schick Injector Butterscotch Bakelite handle Blade safety
$19.99
quality
%%title%%
Antique Safety Razor 1914 Ever Ready Made in USA w Mahoganite Bakelite Case
$55.00
quality
%%title%%
Vintage GEM Safety Razor Silver with white bakelite grip handle
$5.00
quality
%%title%%
Vintage Keen Kutter Safety Razor Rare Red Bakelite Handle and 14 blades
$5.99
quality
%%title%%
Vintage GEM Safety Razor w Bakelite Ivory Case
$16.95
quality
%%title%%
Vintage 1940s NATIONAL Black Bakelite Tech Style DE Safety Razor
$32.50
quality
%%title%%
1950s GEM G Bar Logo Single Edge Safety Razor Gold Plate Bakelite Handle
$9.99
quality
%%title%%
Vintage 1960s Star Safety Razor Bakelite Metal
$40.00
quality
%%title%%
Vintage Schick Injector Safety Razor Bakelite Handle
$29.99
quality
%%title%%
Vintage GEM Micromatic SE Safety Razor Set in Bakelite Case New Blade
$32.50
quality
%%title%%
VINTAGE SCHICK TYPE E DELUXE INJECTOR SAFETY RAZOR CARMEL BAKELITE GOLD TEXTURE
$47.50
quality
%%title%%
Vintage Type E 1935 1945 Schick Deluxe Injector SE Safety Razor Bakelite Handle
$12.50
quality
%%title%%
Vintage GILLETTE Double Edge 3 Piece Tech Safety Razor w Bakelite Handle
$12.99
quality
%%title%%
VINTAGE SCHICK INJECTOR SAFETY RAZOR GOLDTONE BAKELITE w Case Instructions
$21.95
quality
%%title%%
Vintage Gem Safety Razor Gold Toned White Bakelite Handle Original Plastic Case
$11.99
quality
%%title%%
Antique Razor Gem Junior Safety Black w 5 Sided Bakelite Handle 1912 Patent
$17.00
quality
%%title%%
VTG GEM JUNIOR BRASS FLIP TOP BAKELITE HANDLE SAFETY RAZOR model G3 w box
$16.50
quality
%%title%%
VINTAGE SHAVING SCHICK INJECTOR GOLDTONE SAFETY RAZOR BAKELITE HANDLE
$9.99
quality
%%title%%
Vintage GEM Safety Razor Cream Color Bakelite Handle
$5.99
quality
%%title%%
VTG GEM SINGLE EDGE SAFETY RAZOR IVORY BAKELITE HANDLE GOLD TONE HEAD
$12.50
quality
%%title%%
VTG BRASS EVERSHARP SCHICK BAKELITE ART DECO HANDLE INJECTOR BLADE SAFETY RAZOR
$14.99
quality
%%title%%
VINTAGE SCHICK INJECTOR TYPE E SAFETY RAZOR BAKELITE HANDLE IN CASE
$9.50
quality
%%title%%
Vintage Gem Junior Safety Razor Brookyn NY copper brass bakelite handle
$9.89
quality
%%title%%
VINTAGE DECO 1930s EVERSHARP SCHICK Navy Blue Bakelite INJECTOR SAFETY RAZOR
$45.00
quality
%%title%%
Vintage SCHICK Injector Safety Razor Bakelite Handle
$9.99
quality
%%title%%
VINTAGE GEM MICROMATIC SE SAFETY RAZOR SET BAKELITE CASE New BLADES
$39.95
quality
%%title%%
Vintage Type E 1935 1945 Schick Injector Safety Razor Bakelite Handle orig box
$69.95
quality
%%title%%
Vintage Bakelite 3 Piece DE Safety Razor Unknown Maker Made IN USA Clean
$24.99
quality
%%title%%
VINTAGE Art Deco Eversharp SCHICK Navy Blue Bakelite Injector Safety Razor
$35.00
quality
%%title%%
Vintage Schick Injector Safety Razor w Bakelite Handle Original Case
$31.50
quality
%%title%%
Vintage GEM Single Edge Safety Razor Lot 3 Razors Made In USA Bakelite
$41.25
quality
%%title%%
Slant Stroke Bakelite Double Edge Safety Razor
$18.00
quality
%%title%%
VTG 1943 WWII Gem Micromatic Single Sided Safety Razor Yellow Bakelite Clamshell
$25.00
quality
%%title%%
Vintage Gillette 3 Piece Safety Razor w Black Bakelite Box EUC
$31.99
quality
%%title%%
VINTAGE GEM JUNIOR SAFETY RAZOR BLACK BAKELITE HANDLE MAROON END
$24.95
quality
%%title%%
1940s Gillette Black Bakelite Tech 3 Piece Safety Razor Set w Case Box Blade
$44.00
quality
%%title%%
Vintage Old Eversharp Schick Injector Safety Razor Butterscotch bakelite Handle
$8.88
quality
%%title%%
Vintage Type E 1935 1945 Schick Deluxe Injector SE Safety Razor Bakelite Handle
$32.50
quality
%%title%%
Vintage Gem Micromatic Single Edge Safety Razor w Dk Green Bakelite Case
$44.99
quality
%%title%%
Vintage Gillette Trac II Bakelite Handle Safety Razor Handle Super
$29.99
quality
%%title%%
Two Vintage Durham Duplex Safety Razors Made in USA Bakelite Handles LOOK
$23.62
quality
%%title%%
1940s SCHICK INJECTOR Safety Razor w Bakelite Grip Type E 4 VINTAGE
$20.00
quality
%%title%%
Vintage Gillette Lady Blue Star Bakelite Handled Double Edge Safety Razor
$44.99
quality

Bakelite Safety

Electrical transformer tap control - transformers, tap, electric control - Electric industry

Abstract: This paper analyzes Transformer Mechanical tap the practical use of the main problems during the proceeding, which mainly describes how the mechanical tap transformed into electrical control and the corresponding electrical circuit diagram of the improvement and design.

Key words: salt bath furnace; stalls in operation; tap; temperature

1 Transformer operation stalls I work in a factory heat treatment plant for many years, the shop has two furnaces for hardening of the salt bath. Salt bath furnace requires low voltage, high current to work, it is necessary to change the voltage and current transformers. According to the production process requirements, the transformer has three stalls, corresponding to salt bath for three working conditions: 1 file for the furnace heating; 2 files for the furnace heat; 3 file for quenching. The 1 file, 2 files, 3 files positioned by a mechanical tap to change the salt bath furnace transformer primary winding terminal to achieve, and shift operations to be completed by the operatives. The main circuit and control circuit shown in Figure 1, where 1T is the electronic Potentiometer For the furnace temperature setting & Control.

2 , Mechanical problems in tap 2.1 switch short life As high temperature heat treatment plant, combined with the corrosive salt bath furnace gas produced, so that the working environment around the transformer more bad, but mechanical tap is bakelite structural, mechanical contacts, but also a manual shift mode . Therefore, the switch in the use of the process, bakelite ring deformation caused by heat aging or cracking easily. At peak production, and sometimes a life tap less than a month, each tap can not fix the value of a few thousand dollars, workshop equipment to higher maintenance costs.

2.2 manual gearshift positioning are not allowed to exist, issues such contact is not in place

The mechanical tap transformer is used to change the wiring of the primary winding, as is the three-phase transformer, therefore requested the tap at the same time aligned with the three contacts on the transformer corresponding to the three outlet-side stall . As the tap on the installation of the transformer, from the salt bath furnace very close, often subject to corrosion because of their contacts will cause poor contact; the contact then tap the main circuit in the transformer, the current flowing through large , contact easily damaged. In addition, the manual shift orientation are not allowed to exist, the phenomena of contact is not in place, and the operator must stand on shifting transformer, labor-intensive and subject to high temperature gas fumigation of salt bath, personal safety and health were affected. In summary, the mechanical tap-exist easily damaged, maneuver, maintenance workload and other issues, this will cause the quality of quenching not reach the process requirements and the need to re-freeze the salt bath temperature, etc., to the production and factory is a big loss.

3 , Improved method Address the above problems, we tap on the transformer for the electrical transformation, instead of electric machinery. First, the electrical circuit on the transformation of the original owners. In case of power failure, a mechanical tap-positioning a file, 2 files, 3 files, namely to find the file corresponding to the transformer primary winding terminals, good markers for the main circuit contactor wiring . Which control a file with KMl, KM2 Control 2 files, KM3 Control 3 files, the main circuit wiring as shown in Figure 2a.

Followed by transformation of the control circuit design. Stalls due to replacement of the original circuit by the manual tap done, now removed the main circuit tap, switch to the electrical control, the control circuit must be designed to 1 file, 2 files, 3 files were control, here we consider Cross needed a switch to pre-stall, of course you can adopt a three button operation. With electrical interlocking between the various files to ensure that there is only one stall in the main circuit of the contactor. After transformation, the control circuit wiring as shown in Figure 2b.

Order to facilitate the operator to observe and correct operation, we also designed the stall work instructions circuit shown in Figure 3, allowing operators to understand the salt bath furnace at any time the current work status. Use a square light here, the stalls inside the label affixed to the glass, smart and intuitive. Wiring is complete, to consider the safety of persons and equipment can not connect Power supply Contactor KM case (only the electronic potentiometer Power supply Off), to stall action, observation in the main circuit contactor whether to meet the requirements. Then the power of electronic potentiometer connected to see the files after they have accurate temperature control set temperature: that is to set the temperature, disconnect the contactor selected stalls; below the set temperature, the selected contact stalls automatically pull for heating.

4 , Using results Salt bath furnace transformers operate three stalls from the mechanical tap into electrical control gear, to take in the primary circuit of transformer tap removed, allowing frequent operations into three contactor in the control circuit required the use of pre-cross switch gear, the addition of three intermediate Relay Mainly to show the work of the state to consider salt bath furnace. Electrical cabinet with modifications, the transformation of the whole circuit costs around 500 yuan, while a mechanical tap the price is 400 yuan, the plant's two salt bath furnace to replace an average of not less than 10 Tap only.

Stalls after operation using the electric control, and avoid the manual operation is not in place, and contact problems of corrosion, the equipment put into use by the welcome and praise of workers and easy to operate intuitively, and greatly reduced maintenance workload , the factory saved a lot of maintenance funds. On this basis, we successfully transformed the second transformer tap. Years of use down, some wearing only occasional replacement of components (such as light, intermediate relay contacts, etc.), the effect was good.
About the Author

I am a professional editor from
Chinese Manufacturers
, and my work is to promote a free online trade platform.
http://www.chinaqualitycrafts.com/ contain a great deal of information about

jet black granite
,
giallo california

welcome to visit!

Bakelite Safety
If you are looking for a different item here are a list of related products on Antique Jewellery, please check out the following: